”Broson X90”
Built: 2008 Broson Marine Design, Lidköping, Sweden. Hull no. 44.
Material: Aluminium, 5 mm sides, 6 mm bottom.
Length: 11.20 meters (Lwl: 10.40 m)
Beam: 3.80 meters.
Draft: 1.05 meters.
Displacement: 6100 kgs. 7000 kgs fully bunkered.
Tonnage: Not measured.
Main engine: 2 x Volvo Penta D4 300A-C, 600 bHp. VP DPH thrusters with G9 propellers. QL trim tabs. Engine output is increased by 30 - 40 bHp by use of a KCR Diesel Power power box. About 125 runing hours on main engines.
Genset: Mastervolt Whisper 3,5 kW Masterbus Compact generator.
Bunkers: Diesel – 900 liters.
Vatten – 120 liters.
Septik – 140 liters.
Cruising speed: 28 knots at 2550 rpm on about 2 litres per nm. Top speed 38-39 knots at 3300 rpm.
Equipment: Simrad AP 24 auto pilot, Furuno Navnet 12” with 4 kW radar, Nexus NX 2000 VHF, LTC CCTV camera on aft deck. Hiab 008 hydraulic crane, lifts 230 kgs on 3.8 meter reach, 540 Hoist wire winch on crane. Mastervolt MASS GI 3.5 isolation transformater, Eberspächer Airtronic D4 diesel air heater. Anchorlift remote controlled anchor windlass. Pro Save 6-person life raft. Guest remote controlled search light. Two fixed Hella Rally 3003 headlights and two headlights over aft deck.
General arrangement: Wheelhouse with two seats for helmsman and navigator, couch with table seats three and can be used as berth. WC and small galley with microwave oven, Waeco refrigerator, sink, coffee maker and Origo E2000 electric stove. Storage compartment below wheelhouse measures about 2 x 2.4 x 0.8 meters.
Aft deck measures around 3 x 3 meters with work platform and diving ladder in aft. Cargo hold that measures about 2.3 x 1.5 meters contains the genset and tanks. Crane controls and store room in aft of deckhouse.
Position: Stockholm, Sweden.

All details given in good faith but not guaranteed.